manualshive.com logo in svg

Fujitsu Lifebook E342, Руководство пользователя

Fujitsu Lifebook E342 - надежный ноутбук для повседневного использования. Ищете руководство по эксплуатации? Скачайте бесплатное руководство по эксплуатации на manualshive.com. Узнайте все о возможностях этой модели и начните использовать ее на полную мощность.

Поделиться
Скачать
background image

C A U T I O N

User data and user installed software
CAN NOT be recovered from the
Emergency Recovery CD

S e c t i o n   S i x

174

factory. Most often this is necessary if files or
software programs (only those files/programs
that came pre-installed) become corrupt or
accidentally erased.

You have two options available when 
performing recovery:

1. Recover Hard Drive without Format. This

choice replaces all the original factory
installed files and program structures without
eliminating your data files. You will have to
re-install any software that was not included
with the computer when you bought it (but
your data will be intact as long as the installa-
tion of the additional programs is performed
in the same manner).

2. Format and Recover Hard Drive. This choice

removes all the information on the hard disk.
If you choose this option, you will lose any
software you have installed and any other
files you created since you setup your com-
puter. You will have to re-install any software
that was not included with the computer
when you bought it.

P O I N T

It is recommended that you back-up all
data files prior to performing either of
the recovery options.

RECOVERY CD-ROM

Included with your notebook (in the
Accessories box) is an Emergency Recovery 
CD-ROM with the following content:

A backup  copy of the software originally
installed on your new Fujitsu LifeBook (can
only be used on the listed LifeBook models).

Sets of device drivers and utilities (in specific
directories) that are unique to your notebook
configuration for use as documented below.

Read-me files that provide additional use
information for items on this CD-ROM.

If you have access to the internet, visit the
Fujitsu PC Corporation Web Site at 
www.8fujitsu.com to check for the most 
current information and hints on how to 
perform recovery and system updates.

Restoring Your Pre-installed Software from
CD-ROM

The Emergency Recovery CD-ROM enables
restoration of your notebook disk drive con-
tents as they were originally shipped from the

P O I N T

Make certain you have your Operating
System Product ID # available (from the
Certificate of Authenticity) prior to per-
forming recovery. Once the process is
complete and you re-start your note-
book, you will be required to perform all
the setup steps as when the computer
was first bought. (see the section Starting
Your LifeBook for the First Time).

Содержание Lifebook E342

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lifebook E342

DEC Digital HiNote Ultra 2000 series Service Quick Reference Manual preview
Digital HiNote Ultra 2000 series
Бренд: DEC Страницы: 131
FIC KR2W User Manual preview
KR2W
Бренд: FIC Страницы: 128
Dell Latitude 5490 Setup And Specifications preview
Latitude 5490
Бренд: Dell Страницы: 23
Samsung NP35 Installation Manual preview
NP35
Бренд: Samsung Страницы: 2
Samsung NP550XTA-K01US User Manual preview
NP550XTA-K01US
Бренд: Samsung Страницы: 90
Samsung NP700G7A User Manual preview
NP700G7A
Бренд: Samsung Страницы: 139
Samsung NP500R5M-X0AHK User Manual preview
NP500R5M-X0AHK
Бренд: Samsung Страницы: 97
Samsung NP530E5M-X02US User Manual preview
NP530E5M-X02US
Бренд: Samsung Страницы: 107
Samsung NP550P5C (Spanish) Guías Del Usuario Manual preview
NP550P5C
Бренд: Samsung Страницы: 142
Samsung NP680Z5E (Spanish) Guías Del Usuario Manual preview
NP680Z5E
Бренд: Samsung Страницы: 155
Samsung NP300E5MK-EXP User Manual preview
NP300E5MK-EXP
Бренд: Samsung Страницы: 93
Samsung NP600B4C (Spanish) Guía Del Usuario preview
NP600B4C
Бренд: Samsung Страницы: 148
Samsung NP540U4E User Manual preview
NP540U4E
Бренд: Samsung Страницы: 150
Samsung NP300E4MK-EXP User Manual preview
NP300E4MK-EXP
Бренд: Samsung Страницы: 93
Samsung NP300E5K-L04US User Manual preview
NP300E5K-L04US
Бренд: Samsung Страницы: 102
Samsung NP470R5E Series User Manual preview
NP470R5E Series
Бренд: Samsung Страницы: 126
Samsung NP510R5E (Spanish) Guías Del Usuario Manual preview
NP510R5E
Бренд: Samsung Страницы: 134
Samsung NP355V5C User Manual preview
NP355V5C
Бренд: Samsung Страницы: 141

Бренды по названию

Популярные бренды

Загрузить еще бренды