Fujitsu Lifebook E342, Руководство пользователя

Страница: 145 / 208

S e c t i o n F i v e
138
C A U T I O N
The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a digital
PBX as it may cause serious damage to
the internal modem or your entire note-
book. Consult your PBX manufacturer’s
documentation for details. Some hotels
have Digital PBX systems. Be sure to find
out BEFORE you connect your modem.
P O I N T
Windows NT 4.0 does not support
USB devices.
C A U T I O N
Due to the limitations of Windows 95 at
the time USB technology was evolving,
not all USB devices and/or drivers are
guaranteed to work with Windows 95.
SERIAL PORT DEVICES
To connect an RS-232C device to the serial
port, be sure that the connector is the right size
and aligned, then push in until it is fully seated.
When it is seated tighten the hold-down screws,
one on each end of the connector.
(See Figure 1-10 on page 10.)
USB DEVICES
When installing a device on the USB Port, be
sure that the connector is the right size, aligned,
and fully seated. (See Figure 1-9 on page 9.)
MICROPHONE
Make sure that your mono microphone is
equipped with an 1/8" (3.5 mm) mono
mini-plug. Make sure the plug is aligned
and push it into the jack until fully seated.
(See Figure 1-9 on page 9.)
STEREO LINE IN DEVICE
Make sure that your stereo line in audio device,
a cassette recorder, for example, is equipped
with an 1/8" (3.5 mm) stereo mini-plug. Make
sure the plug is aligned and push it into the jack
until fully seated. (See Figure 1-9 on page 9.)
HEADPHONES
Make sure that your stereo headphones are
equipped with an 1/8" (3.5 mm) stereo mini-
plug. Make sure the plug is aligned and push
it into the jack until fully seated.
(See Figure 1-9 on page 9.)
P O I N T
Plugging in headphones disables the
built-in stereo speakers.
TELEPHONE LINES
To attach a telephone line to the internal
modem, locate the RJ-11 jack on the left side of
your notebook. Plug one end of the telephone
cable into the telephone line outlet. Orient the
telephone cable with the release latch on the
connector down. Push it into the jack until it
clicks and latches. (See Figure 1-10 on page 10.)