5
SECTION 1
Right Panel
1.
Volume control
Used to adjust the volume up or down. Turn it counterclockwise to lower the volume, or turn it
clockwise to raise the volume. You can also use the Volume Control dialog box to adjust the
volume and sound balance. If you cannot obtain an enough volume even if you turn up the
volume to a maximum, then use the Volume Control dialog box to make system sounds louder.
CAUTION
HEARING LOSS
Turn down the volume to a minimum before connecting a device to the headphone
jack, Line-In jack or microphone jack. Failure to do so could cause damage to the
device connected or result in hearing loss because of very loud sound produced.
1 2 3 4
5
6
Critical Point
If no sound comes out from the speakers even if you adjust the volume, press and hold down
the
key while holding the
key down until you hear a beep. Also, check to see that
[Mute] is not selected in the Volume Control dialog box.
