Fujitsu FX-3001SR, Руководство пользователя

Страница: 89 / 194

SERVIS IP-Serial
1p Converter
User's Guide
79
4
Command D
e
scriptions
4.1.25 writeflash Command
Overview Writes CF or NFS files to flash ROM.
The firmware can be updated by specifying the path of
the binary image file supplied by Fujitsu Component
Limited.
The LED blinks orange when writing the files.
Syntax writeflash <filepath>
Parameter(s) filepath = Specifies the full path (lo filename).
The following are the files that can be saved.
List of files
File name Content
ntp.conf NTP config file
localtime Time zone symbolic file
portmng.cf Configuration definition file
hosts Host name definition file
port.conf Serial port config file
ifconfig.sm0 Network card config file
users User config file
rc.conf Network config file
passwd Password file
master.passwd Password master file
group Group config file
services Network service/port config file
snmpd.conf Snmpd config file
Binary image Content
ipl IPL
spl SPL
maptbl Map
information
self Self-diagnostics
kernel4 Kernel that supports
fs4 File system that supports
recover4 Recovery kernel that supports
Password required? No
Example (from the local console)
Writes the NFS file.
Restart the system after writing the file to reflect the changes.
$ writeflash /mnt/conf1/ntp.conf
Enter
$