manualshive.com logo in svg

Fujitsu FX-3001SR, Руководство пользователя, Страница: 122 / 194

Поделиться
Скачать
Fujitsu FX-3001SR Скачать руководство пользователя страница 122

   

 

SERVIS IP-Serial   

 

1p Converter

 

 

User's Guide 

112

5 

Menu Settings 

 

5.1.3.4  set ntp server 

 

 Overview    

Sets the NTP server. 

  

 When ntpd is set to ON, the configured NTP server name and 
[ON] are displayed. 

 

 

 

 

When ntpd is set to OFF, [OFF] is displayed. 

 

 Menu location   MAIN MENU 

→

 3. time 

→

 4. set ntp server [ON/OFF] 

 

 Command    

None 

  

 

 When "s. save" is performed after setting this option, the ntp 
command is executed and the setting is reflected. 

 Refer to 

4.1.10 ntp Command (page 63)

 

 

 Output   

 
 

NTP Server is being set from OFF to ON. 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

When NTP Server is set to ON 

 
 

 

 Notes  

 

(1)  After setting this option, save using "s. save". This setting will not be 

enabled if it is not saved. 

(2)  When executing ntpd, set the date and time in advance using set time. 

When the configured date and time vary greatly from the time on the 
time server, the time cannot be obtained. 

--- 3. TIME MENU -------- 
 1. display time 
 2. set time 
 3. set timezone 
 4. set ntp server [OFF] 
 s.  save 
 0. return to MAIN MENU 
------------------------- 
select > 4 
 
set NTP Server [off -> on] 
change [] to : 

10.74.106.100

 

Enter

 

 
 
--- 3. TIME MENU --------<changed, not saved> 
 1. display time 
 2. set time 
 3. set timezone 
 4. set ntp server [ON] 
    ->10.74.106.100 
 s.  save 
 0. return to MAIN MENU 
------------------------- 
select > 

set NTP Server [on -> off]

Содержание FX-3001SR



































































































































































































Отзывы:

Нет отзывов