background image

   

 

SERVIS IP-Serial   

 

1p Converter

 

 

User's Guide 

134

Menu Settings 

 

5.1.5.4 kill 

 

 Overview    

Forces the specified user who is logged in to log out. 

 

 

 

 

If the specified user is logged in from multiple terminals, all of 
the connections are terminated. 

 

 Menu location   MAIN MENU 

 5. user 

 4. kill 

 

 Command    

userkill 

 Refer to 

4.1.14 userkill Command (page 67)

 

 

 Output   

The connection for user "tester1" is being terminated. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 Notes  

 

(1)  The admin user cannot be forced to log out. 
(2)  A password will be requested (admin password). 

 

 

 

--- 5. USER MENU -------- 
 1.  list 
 2.  add 
 3.  delete 
 4.  kill 
 5.  reject 
 6. change password 
 0. return to MAIN MENU 
------------------------- 
select > 

4

 

Enter

 

 
kill user name: 

tester1

 

Enter

 

administrator  password:       

Enter

 

userkill completed. 
 
 
--- 5. USER MENU -------- 
 1.  list 
 2.  add 
 3.  delete 
 4.  kill 
 5.  reject 
 6. change password 
 0. return to MAIN MENU 
------------------------- 
select > 

Содержание FX-3001SR



































































































































































































Отзывы: