Fujitsu FI-800R, Руководство оператора, Страница: 50 / 205

Precautions
●
Notes on the documents to be scanned
Depending on the documents to be scanned, take note of the following.
● Since carbonless papers contain chemical substances which may harm the pad unit and rollers (e.g. pick
roller), be aware of the following risks:
-
Cleaning
If paper jams occur frequently, clean the pad unit and pick roller.
For details, refer to
Daily Care (page 83) .
-
Replacing the consumables
The life of the pad unit and pick roller may end sooner compared to scanning wood-free papers.
● When scanning wood containing papers, the life of the pad unit and pick roller may end sooner compared to
scanning wood-free papers.
●
The pad unit or pick roller may be damaged when a photo/sticky note on the document comes into contact
with the pad unit or pick roller during scanning.
● The surface of the document may be damaged when glossy papers such as photos are scanned.
For documents that can be damaged quite easily, use the optional Carrier Sheet or Photo Carrier Sheet.
●
The light of the LED may reflect brightly when glossy papers are scanned.
●
When scanning semi-transparent documents, set [Brightness] higher in the scanner driver to avoid bleed-
through.
●
When you scan documents written in lead pencil, make sure you clean the pad unit and rollers frequently.
For details about cleaning, refer to
Daily Care (page 83) .
● If documents are not fed, or documents are fed overlapped or jammed frequently, refer to Troubleshooting
(page 113) .
●
All documents must be flat on the leading edge.
Make sure that curls on the leading edge of the documents are kept within the following range.
●
Notes on plastic cards
When you scan plastic cards, take note of the following.
●
Make sure you use a card that meets the following specifications, and check if the card can be fed before
scanning it.
- Type: Compliant with the ISO7810 ID-1 type
How to Load Documents
50