manualshive.com logo in svg

Fujitsu FI-800R, Руководство оператора, Страница: 117 / 205

Поделиться
Скачать
Fujitsu FI-800R Скачать руководство пользователя страница 117

The Stacker is Not Closed Automatically

Check the following points

●

Did any paper jam occur? (page 117)

If the problem persists, refer to 

The First Measures to Take When You Encounter any Errors or Troubles

(page 140)

 and take measures accordingly. If the problem still persists, check each item in 

Before You

Contact the Scanner Service Provider (page 141)

 first, then contact the distributor/dealer where you

purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.

●

Did any paper jam occur?

Solution

If a paper jam did occur, first open the ADF, and then push the parts on either side of the stacker to close
the ADF so that the stacker will also be closed automatically.
For details about the solution for paper jams inside the ADF, refer to 

When a Paper Jam Occurs (page 103)

.

Troubleshooting

117

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов