manualshive.com logo in svg

Fujitsu FI-800R, Руководство оператора, Страница: 36 / 205

Поделиться
Скачать
Fujitsu FI-800R Скачать руководство пользователя страница 36

6

In the setup window for the scanner driver, configure the scan settings.
For some image scanning applications, the setup window for the scanner driver may not appear.

7

Scan documents with the image scanning application.

ATTENTION

Do not perform an operation to disconnect the connection between the scanner and the computer such as the
following:

●

Disconnecting the USB cable

●

Logging off

 

HINT

●

When the confirmation window for continuous scanning appears, perform either of the following operations:

-

Insert a document or load documents and press the [Scan/Stop] button to continue scanning.

-

Press the [Scan/Stop] button without any documents inserted or loaded in order to finish scanning.

●

If the orientation of the scanned image of the open booklet is incorrect, change the rotation setting in the
scanner driver. For details, refer to the help for the scanner driver.

 

How to Perform a Basic Scan

36

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов