manualshive.com logo in svg

Fujitsu FI-800R, Руководство оператора, Страница: 134 / 205

Поделиться
Скачать
Fujitsu FI-800R Скачать руководство пользователя страница 134

A Shadow Appears at the Top or the Bottom of the Image

Check the following points

●

Have you adjusted the offset (position to start the scan)? (page 134)

●

Did you use the page edge filler function to fill in the shadow around the edge? (page 134)

If the problem persists, refer to 

The First Measures to Take When You Encounter any Errors or Troubles

(page 140)

 and take measures accordingly. If the problem still persists, check each item in 

Before You

Contact the Scanner Service Provider (page 141)

 first, then contact the distributor/dealer where you

purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.

●

Have you adjusted the offset (position to start the scan)?

Solution

In [Device Setting] of the Software Operation Panel, adjust the offset in the sub-scanning direction.
For details, refer to 

Adjusting the Position to Start the Scan [Offset Setting/Vertical magnification

Adjustment] (page 168)

.

●

Did you use the page edge filler function to fill in the shadow around the edge?

Solution

In [Device Setting 2] of the Software Operation Panel, use the page edge filter function to fill out the
shadow that appeared on the edge of the document.
For details, refer to the following:

●

Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler (U-turn)] (page 171)

●

Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler (Return)] (page 173)

For the settings in the scanner driver, refer to the scanner driver's Help.

Troubleshooting

134

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов