manualshive.com logo in svg

Fujitsu FI-800R, Руководство оператора, Страница: 120 / 205

Поделиться
Скачать
Fujitsu FI-800R Скачать руководство пользователя страница 120

Scanning Takes a Long Time

Check the following points

●

Does the computer meet the recommended requirements? (page 120)

●

Is the USB cable connected to the USB 1.1 port on the computer? (page 120)

●

Did you start a scan while the computer was unstable (for example, immediately after computer start-up
or logon)? (page 120)

●

Are the rollers clean? (page 120)

If the problem persists, refer to 

The First Measures to Take When You Encounter any Errors or Troubles

(page 140)

 and take measures accordingly. If the problem still persists, check each item in 

Before You

Contact the Scanner Service Provider (page 141)

 first, then contact the distributor/dealer where you

purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.

●

Does the computer meet the recommended requirements?

Solution

Use a computer that meets the recommended CPU, memory, and other requirements.
For details, refer to 

System Requirements (page 26)

.

●

Is the USB cable connected to the USB 1.1 port on the computer?

Solution

Connect the USB cable to the USB 3.2 Gen1x1/USB 3.0/USB 2.0 port.

●

Did you start a scan while the computer was unstable (for example, immediately after computer start-up
or logon)?

Solution

When you start or log onto the computer, wait a while before starting a scan.

●

Are the rollers clean?

Solution

Clean the rollers.
For details, refer to 

Cleaning the Inside of the Scanner (ADF) with a Cloth (page 89)

.

Troubleshooting

120

Содержание FI-800R














































































































































































































Отзывы:

Нет отзывов