Fujitsu FI-6130 Скачать руководство пользователя

Страница: 27 / 222

2.1 Turning the Scanner ON

The Power Save mode keeps the scanner in a low-powered state after it has been turned ON.

If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to the Power Save mode.

In the Power Save mode, the indication of the Function Number Display on the operator panel goes out, but the Power LED

stays lit in green.

To return from the Power Save mode, perform one of the following:

●

Load the document on the ADF paper chute.

●

Press any button on the operator panel.

The scanner will be turned OFF when pressing down the Power button for at least two seconds.

●

Execute a command from the scanner driver.

file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/02/c02_01_01.htm (5/5) [2008/10/30 15:13:43]

Содержание FI-6130































































































































































































































Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды

Fujitsu FI-6130, Руководство оператора

Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды