Fujitsu FI-6130 Скачать руководство пользователя

Страница: 207 / 222

8.8 Intelligent Multifeed Setting

Manual mode

In this mode, when the scanner detects a multifeed and stops document feeding, you can reload the document

from the ADF paper chute and specify whether or not to bypass the Multifeed Detection. Note that the scanner

does not memorize the position and size of the paper attached to the document.

Auto mode 1

When the scanner detects a multifeed and stops document feeding, reload the document from the ADF paper

chute. In this mode, the scanner memorizes the position and size of the paper attached to the document when a

multifeed was detected for the first time. If this pattern is determined to be a multifeed, the Multifeed Detection

will be bypassed from the next scanning and on.

Auto mode 2

When the scanner detects a multifeed and stops document feeding, reload the document from the ADF paper

chute. In this mode, the scanner memorizes the size of the paper attached to the document when a multifeed was

detected for the first time. If this pattern is determined to be a multifeed, the Multifeed Detection will be bypassed

from the next scanning and on.

4. Specify whether or not to remember the multifeed pattern at power-off under [Remember

multifeed pattern at power-off].

Selecting [Remember] allows you to use the last-remembered multifeed pattern before power-off.

(Eight patterns can be memorized at power-off.

）

file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/08/c08_08_01.htm (2/2) [2008/10/30 15:15:10]

Содержание FI-6130































































































































































































































Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды

Fujitsu FI-6130, Руководство оператора

Результаты поиска

Содержание FI-6130

Отзывы:

Похожие инструкции для FI-6130

Бренды по названию

Популярные бренды