Fujitsu ETERNUS DX100 S3, Руководство по настройке

Страница: 111 / 188

10
Click the [OK] button.
The e-mail notification settings are applied.
11
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
6.2.3 Syslog Setup
If an event occurs in the ETERNUS DX Disk storage system, logs for the event can be sent to the specified
syslog server (external server).
•
Up to two syslog servers can be set.
•
Make sure to check whether the syslog server receives logs correctly after the syslog notification environ-
ment setup is complete.
•
Logs are not sent again when a communication error occurs between the ETERNUS DX Disk storage sys-
tem and the syslog server.
The syslog setting is explained below.
1
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
2
In [Category], click [Network].
The [Network] screen appears.
3
In [Action], click [Setup Syslog].
The [Setup Syslog] screen appears.
4
In the [Setup Syslog] screen, set the required items.
• Select "on(RFC3164)" or "on(RFC5424)" for "Send Log".
To send messages in RFC5424 format to a target syslog server that supports RFC5424, select "on
(RFC5424)". If this is not the case, select "on (RFC3164)".
Chapter 6 Monitoring Settings
6.2 Various Notification Settings
111
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0