Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF, Руководство по настройке

Страница: 3 / 29

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2018 FUJITSU LIMITED P3AM-5672-10ENZ0
3
About this Manual
Contents and Structure
This document is composed of the following seven chapters:
●
Chapter 1 Workflow
This describes the workflow required to set up an ETERNUS DX/AF storage system for BS2000.
●
Chapter 2 Notes
This describes issues to be noted when connecting the ETERNUS DX/AF storage system and the BS2000
Server.
●
Chapter 3 Checking Prerequisites and Fibre Channel Card Information
This describes software requirements and how to get the Fibre Channel card WWNs of BS2000 Servers.
●
Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000
This describes special settings required when connecting an ETERNUS DX/AF storage system to a server
with operating system BS2000.
●
Chapter 5 Set Up the BS2000 Server for ETERNUS DX/AF Storage Systems
This describes the configuration of ETERNUS DX/AF volumes on SE, S- and SQ-Servers with the
operating system BS2000.
●
Chapter 6 Check the LUNs
This describes how to verify installation and configuration by means of X2000 and BS2000.
●
Chapter 7 Example
Examples for the setup of ETERNUS DX/AF storage systems and BS2000 Server.
Acknowledgements
• The company names, product names and service names mentioned in this document are registered
trademarks or trademarks of their respective companies.