manualshive.com logo in svg

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF, Руководство по настройке

Поделиться
Скачать
Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Скачать руководство пользователя страница 24

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Copyright 2018 FUJITSU LIMITED

P3AM-5672-10ENZ0

24

Chapter 7 

Example

7.1

Configuration and Generation of an ETERNUS DX8700 S3 for 
BS2000 (SE Server)

■

Configuration Data

80 logical volumes are to be configured, each connected via 4 paths.

The ETERNUS DX8700 S3 has 4 control modules (CMs), 2 channel adapters (CAs) per CM and 4 FC ports on CA0
and 2 FC ports on CA1 of each CM. Not all ports are used in this example.

■

Configuration of the Fabric

The following describes a sub-configuration which is connected to a SE700 via FC switches:

4 8Gbit FC ports in the DX8700 S3

(CE#0, CM#0, CA#0, Port#0) with WWPN 5000 00E0 DAC1 9A00 (Fabric1)
(CE#1, CM#0, CA#1, Port#1) with WWPN 5000 00E0 DAC1 9A15 (Fabric1)
(CE#0, CM#1, CA#1, Port#1) with WWPN 5000 00E0 DAC1 9AC5 (Fabric2)
(CE#1, CM#0, CA#0, Port#0) with WWPN 5000 00E0 DAC1 9A10 (Fabric2)

are connected to 4 8Gbit FC ports on the FC fabrics.
A transfer rate of 8Gbit/s is set for the FC ports on the switches.

4 FC channels of the SE700 (8Gbit/s) 

4A with WWPN 204A 0000 0EA0 0CE3   (Fabric1)
47 with WWPN 2047 0000 0EA0 0CE3   (Fabric1)
0D with WWPN 200D 0000 0EA0 0CE3   (Fabric2)
04 with WWPN 2004 0000 0EA0 0CE3   (Fabric2)

are connected to 4 8Gbit FC ports on the FC fabrics.
A transfer rate of 8Gbit/s is set for the FC ports on the switches.

4 zones (2 x 2) are configured for the channel paths in the FC fabrics.

■

Configuration of the ETERNUS DX8700 S3

First, configure the host-related settings in the DX8700 S3.

Содержание ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды