Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF, Руководство по настройке

Страница: 14 / 29

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2018 FUJITSU LIMITED P3AM-5672-10ENZ0
14
Chapter 4
Set Up the ETERNUS DX/AF Storage System
for BS2000
This section explains the required special settings for BS2000. For details of how to use
ETERNUSmgr to perform these settings, refer to the "ETERNUSmgr User Guide".
4.1 Setting the Host Responses
The ETERNUS DX/AF storage system Host Response parameters must be set to match the way in which the
server will process the ETERNUS DX/AF storage system request responses.
These parameters are different for each OS, they must be set before connecting the ETERNUS DX/AF storage
system to the server.
Using the predefined "Host Response Profile" with the name "BS2000" is recommended.
The standard BS2000 Host Response "BS2000" is preset with the correct parameter settings (incl. 4096
volumes / port).
When setting the access path using the ETERNUS SF Storage Cruiser, Host Response No. will be set to default
values.
Set the Host Response No. after setting the access path using the ETERNUS SF Storage Cruiser.
Controller Category Action
DX/AF series Connectivity > Host Response Add Host Response
Parameter BS2000
Name BS2000
Byte-0 of Inquiry Response No Conversion (Default)
Inquiry VPD ID Type Type1 + Type3
Inquiry Standard Data Version Version 5 (Default)
Command Timeout Interval Default (25sec.)
Load Balance Response Unit Attention (Default)
Reservation Conflict Response for Test Unit Ready Conflict
Change Volume Mapping Report
Volume Capacity Expansion Report
Vendor Unique Sense Code No Report (Default)
Host Specific Mode NR1000V Mode, 4096 LUNs: BS2000 Mode
Asymmetric / Symmetric Logical Unit Access ACTIVE / ACTIVE (Default)
iSCSI Discovery Reply Mode All - Reply All ports (Default)