Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF, Руководство по настройке

Страница: 12 / 29

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2018 FUJITSU LIMITED P3AM-5672-10ENZ0
12
Chapter 3
Checking Prerequisites and Fibre Channel Card
Information
3.1 ETERNUS Firmware Prerequisites
For all BS2000 Servers
(please respect 'important notices' and 'restrictions' in the storage bulletins):
3.2 BS2000 Hardware Prerequisites
The following server models are supported:
• DX400 S2 series:
A firmware version of V10L64 or higher is required
• DX8700 S2:
A firmware version of V10L64 or higher is required
• DX500 S3/DX600 S3:
A firmware version of V10L70 or higher is required
• DX8700 S3:
A firmware version of V10L70 or higher is required
• DX500 S4/DX600 S4:
A firmware version of V10L80 or higher is required
• AF650/AF650 S2:
A firmware version of V10L80 or higher is required
• Using 4096 LUN feature is supported
• SE Server:
SE300, SE500, SE700, SE300B, SE500B, SE700B
• S-Server:
S175, S210
• SQ-Server:
SQ210