manualshive.com logo in svg

Fujitsu ESPRIMO P, Руководство по эксплуатации

Поделиться
Скачать
Fujitsu ESPRIMO P Скачать руководство пользователя страница 52

System upgrades

 

 

44 

A26361-K1007-Z230-1-7619, edition 1 

►

 

Close the casing (see "Closing the casing"). 

 

i

 

If you have installed or removed a PCI board, please check the relevant PCI slot settings 
in the 

BIOS Setup

. If necessary, change the settings. Further information is provided in the 

PCI board documentation. 

 

Low-profile boards 

You will need to fit a corresponding slot adapter first before you can install a low-profile board in a 
normal board slot. 
Two-piece board slot covers are fitted to the slots intended for low-profile boards. The two pieces are 
connected together with a screw. 

►

 

Remove the desired board slot cover and undo the screw.  

 

!

 

Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot 
cover (cooling, fire protection or EMC regulations to be complied with).  

 

Mounting slot adapter 

2

1

►

 

Fit the slot adapter on the slot cover of the 
low-profile board (1) and screw it on (2). 

Now you can install the low-profile board in a 
suitable slot like a normal board (see "Installing a 
board"). 

Removing slot adapter 

2

1

►

 

Unscrew the screw (1) and remove the slot 
adapter (2). 

 

 

 

Содержание ESPRIMO P







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды