manualshive.com logo in svg

Fujitsu ESPRIMO P, Руководство по эксплуатации

Поделиться
Скачать
Fujitsu ESPRIMO P Скачать руководство пользователя страница 29

  

A26361-K1007-Z230-1-7619, edition 1 

21 

Operation 

Switching the device on 

►

 

If necessary, switch the monitor on (see the operating manual for the monitor). 

►

 

Switch on the device with the main power switch located on the rear of the device (if present). 

►

 

Press the ON/OFF button on the front of the device. 

The power-on indicator lights green and the device is started. 

Switching off the device 

►

 

Shut down the operating system properly. In Windows: via the 

Start

 menu and the 

Exit function

. 

►

 

If the operating system does not automatically switch the device into energy-saving mode or 
switch it off, press the ON/OFF switch. 

If the device is ready-to-use, the device consumes a minimum of energy. 

►

 

Switch the device off at the main switch (if present). The device no longer uses any power. 

 

!

 

The main switch and the ON/OFF switch do not disconnect the device from the mains 
voltage. To completely disconnect the mains voltage, remove the power plug from the 
socket. 

 

►

 

If necessary, switch the monitor off (see the operating manual for the monitor). 

Содержание ESPRIMO P







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды