Fujitsu ESPRIMO P Скачать руководство пользователя страница 36

Страница: 36 / 70

Troubleshooting and tips

A26361-K1007-Z230-1-7619, edition 1

The device cannot be switched off with the ON/OFF switch.

Cause

Troubleshooting

The device has not been switched on
with the ON/OFF switch.

►

Press the ON/OFF switch again.

System crash

►

Press the ON/OFF switch for at least 4 seconds,
until the device switches off.

The operating system is not shut-down properly in the
process. Error messages are therefore possible the next
time the system is booted.

Monitor remains blank

Cause

Troubleshooting

Monitor is switched off.

►

Switch your monitor on.

Power saving has been activated
(monitor is blank).

►

Press any key on the keyboard.

►

Deactivate the screen saver. If necessary, enter the
appropriate password.

Brightness controls set to dark.

►

Adjust the brightness control. For detailed
information, please refer to the operating manual
supplied with your monitor.

Power cable is not connected.

►

Switch off the monitor and the device.

►

Check that the monitor power cable is properly
connected to the monitor and to a grounded mains
outlet or to the monitor socket of the device.

►

Check that the device power cable is properly
plugged into the device and a grounded mains
outlet.

►

Switch on the monitor and the device.

Monitor cable is not connected.

►

Switch off the monitor and the device.

►

Check that the monitor cable is properly connected
to the device and monitor.

►

Switch on the monitor and the device.

Содержание ESPRIMO P







































































Результаты поиска

Содержание ESPRIMO P

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu ESPRIMO P, Руководство по эксплуатации

Результаты поиска

Содержание ESPRIMO P

Отзывы:

Бренды по названию

Популярные бренды