MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011
Glossary-1
Glossary
Glossary
A
Allocation Volume
The maximum amount of product the unit will dispense, if programmed.
Alternative Fuels
Any fuel other than straight gasoline, diesel fuel, or kerosene. Alternative fuels containing
ethanol such as E85, methanol, MTBE, Biodiesel, and other potential significant additives.
Authorized Service Contractor (ASC)
A Gilbarco-trained and authorized service contractor.
B
Bellows
Refer to
Boot Area
The part of the unit where the nozzle is stored.
Breakaway
Device attached to the hoses on pump/dispensers that detaches if a customer drives off with
the nozzle still attached to the cars; the device protects against gasoline being spilled and a
resulting fire, and it minimizes damage to the pump/dispensers in the event of a drive off and
stops fuel flow through the separated hose.
C
CIM
Customer Interface Module; the portion of the electronics through which the dispenser
interfaces with the customer (for example, displays and card readers).
CIM Door
(Customer Interface Module) Door on the unit that provides access to the Manager’s Keypad
and some electrical components of the unit.
Command Code
Two-digit number used in programming the unit; this code indicates which setting to
configure.
Component Inspections
Periodic inspections of various unit components performed by the Station Manager; the
Station Manager must look for signs of damage and wear for each component.
Note: For a list of components and the recommended frequency of inspection, refer to
