manualshive.com logo in svg

Fujitsu eclipse, Руководство по эксплуатации, Страница: 23 / 76

Поделиться
Скачать
Fujitsu eclipse Скачать руководство пользователя страница 23

MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011

Page 19

Operating the Units

Introducing the Encore/Eclipse Series

Operating the Units

The Encore and Eclipse units can dispense fuel in one of the following two modes:

• Console mode (Two-wire) - Authorization and payout occurs at the console
• Standalone mode - Authorization and payout occurs at the pump

This section provides instructions for operating the units in either mode.

Note: For the location of components, refer to the illustrations in 

“Introducing the Encore/

Eclipse Series”

 on 

page 7

.

Console Mode (Two-wire)

Consoles can be set up in a pre-authorized mode where a sale is automatically allowed, or in 
an authorization mode where a sale requires initiation by a cashier. 

To operate a unit in authorization mode, proceed as follows:

Note: Step 

1

 can occur before or after steps 

2

 and 

3

.

1

Authorize the unit at the console.

2

Remove the nozzle and lift the pump handle, if required.

3

Select the grade and/or payment form, if required.

4

Dispense the fuel.

5

Return the nozzle to the nozzle boot.

6

Pay out the fuel transaction at the console. 

Standalone Mode

Standalone mode does not involve the console with the sale. To operate a unit in a 

 

pre-authorized mode, proceed as follows:

1

Remove the nozzle and lift the pump handle, if required.

2

Select the grade and/or payment form, if required.

3

Dispense the fuel.

4

Return the nozzle to the nozzle boot.

Содержание eclipse













































































Отзывы:

Нет отзывов