System expansions
Connecting display adapters with additional
power supply
Fujitsu recommends ordering display adapters (GFX) together with the system so that
they have been installed and tested in the factory. This guarantees that the wiring
meets the requirements of the respective GFX card.
For systems that are supplied without a GFX card, a standard GFX cable is enclosed in the system
accessories pack. This enables the use of a GFX card with 6 and/or 8-pin connectors.
If you require other cables, you can purchase these from Fujitsu. The power supply (PSU)
installed in the system can supply a continuous 18.5 A for display adapters via any power
supply. Ensure that your display adapter(s) do not require higher power levels.
CELSIUS
M740
CELSIUS
M740power
CELSIUS
R940
CELSIUS
R940power
Rated
power of
the power
supply
(PSU)
Continuous
current
Number of
GFX ports
(8 pin)
x
-
-
-
600 W
18.5 A
1
-
x
x
-
1000 W
18.5 A
2
-
-
-
x
1300 W
18.5 A
3
Upgrading main memory
►
Open the casing (see
"Opening the casing", Page 33
).
Mainmemory
►
If the bays are located below the hard disk fan: Remove the hard disk fan
(see
"Remove the hard disk fan", Page 67
).
►
If the bays are located below the fan at the power supply: Remove the fan at the
power supply (see
"Removing the rear fan", Page 70
).
►
Upgrade the main memory according to the description in the manual for the mainboard.
►
If the bays are located below the fan at the power supply: Install the fan at the
power supply again (see
"Installing the rear fan", Page 71
).
►
If the bays are located below the hard disk fan: Install the hard disk fan again
(see
"Install the hard disk fan", Page 69
).
►
Close the casing (see
"Closing the casing", Page 34
).
66
Fujitsu
Содержание CELSIUS M740
Страница 1: ...System Operating Manual FUJITSU Workstation CELSIUS M740 CELSIUS M740power ...
Страница 3: ......
