Fujitsu CELSIUS M740 Скачать руководство пользователя страница 23

Страница: 23 / 81

Getting started

Switching on for the

rst time: installing the software

Installing,

Software,

Installing,

Once the installation has been started the device must not be switched
off, unless the installation has been completed.

During installation, the device may only be rebooted when you are requested to do so!

The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.

If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.

Contact your network administrator if you have any questions about these settings.

When you switch on the device for the

rst time, the supplied software

is installed and con

gured. Plan a reasonable amount of time for this,

as this process must not be interrupted.

You may need the licence number for Windows during the installation. The licence
number is located on a label on your device.

Switch on the monitor and the machine

In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.

►

Switch on the monitor (see operating instructions for the monitor).

►

Press the on/off button on the front of the machine.

The operational display will light up and the machine will start.

Fujitsu

Содержание CELSIUS M740


















































































Результаты поиска

Содержание CELSIUS M740

Отзывы:

Похожие инструкции для CELSIUS M740

Бренды по названию

Популярные бренды

Fujitsu CELSIUS M740, Руководство по эксплуатации

Результаты поиска

Содержание CELSIUS M740

Отзывы:

Похожие инструкции для CELSIUS M740

Бренды по названию

Популярные бренды