background image

69

SECTION 3

Caring for your Floppy Disk Drive

• To clean, wipe the floppy disk drive clean with a dry soft cloth, or with a soft cloth dampened with

water or a solution of neutral detergent. Never use benzene, paint thinner or other volatile material.

• Avoid storing the floppy disk drive in extremely hot or cold locations, or in locations subject to

severe temperature changes. Store at temperatures between 50°F (10°C) and 125°F (52°C)

• Keep the floppy disk drive out of direct sunlight and away from hating equipment.

• Avoid storing the floppy disk drive in locations subject to shock and vibration.

• Never use the floppy disk drive with any liquid, metal, or other foreign matter inside the floppy

disk drive or disk.

• Never disassemble or dismantle your floppy disk drive.

DVD/CD-RW/CDs

Caring for your DVD/CD-RW/CDs

• DVD/CD-RW/CDs are precision devices and will function reliably if given reasonable care.

• Always store your DVD/CD-RW/CDs in its case when it is not in use.

• Always handle DVD/CD-RW/CDs by the edges and avoid touching the surface.

• Avoid storing any DVD/CD-RW/CDs in extreme temperatures.

• Do not bend DVD/CD-RW/CDs or set heavy objects on them.

• Do not spill liquids on DVD/CD-RW/CDs.

• Do not scratch DVD/CD-RW/CDs.

• Do not put a label on DVD/CD-RW/CDs.

• Do not get dust on DVD/CD-RW/CDs.

• Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen.

• If a DVD/CD-RW/CD is subjected to a sudden change in temperature, cold to warm condensation

may form on the surface. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at
room temperature, DO NOT use a hair dryer or heater to dry DVD/CD-RW/CDs.

• If a DVD/CD-RW/CD is dirty, use only a DVD/CD-RW/CD cleaner or wipe it with a clean, soft, lint

free cloth starting from the inner edge and wiping to the outer edge.

Quilt Sec 3_66-79

17/10/2000, 15:38

69

Содержание b2178


























































































Отзывы: