Fujitsu b2178 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 89

background image

Copyright

Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However, as
ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the
accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.

LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, and Windows NT are registered trademarks of the Microsoft Corporation of the
United States in the United States and other countries.
Intel is a registered trademark of the Intel Corporation of the United States.
Celeron is a trademark of the Intel Corporation of the United States.
ATI is a registered trademark of ATI Technologies INC
Puma Technology, Intellisync is a trademark of Puma Technology Corporation of the United States.
Phoenix is a registered trademark of Phoenix Technologies Corporation of the United States.
K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation.
Other product names are trademarks or registered trademarks of their respective companies.
Other products are copyrighted by their companies.

Copyright© 1981-1999 Microsoft Corporation, All rights reserved.
Copyright© 1999 Phoenix Technologies, Ltd., All rights reserved.

All other products are trademarks or registered trademarks of their respective companies.

Explanations of the adjustments for the track pad cursor control are taken in part from the ALPS GlidePoint Driver
User’s Guide, copyright by LCS/Telegraphics in 1996.

© Copyright 2000 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced, or
translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmit-
ted in any electronic form without the written consent of Fujitsu Limited.

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name

:

FPCA

Address

:

Fujitsu PC (Asia) Pte Ltd

200 Pandan Loop
#05-03, Pantech 21
The Computer Centre

Singapore 128388

Telephone

:

65-776 0688

Declares that product: Model

:

LifeBook B2178

This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference
received, including interference that may cause undesired operation.

Quilt Content

17/10/2000, 15:36

1

1
2
3
...
»

Содержание b2178


























































































Отзывы:

Нет отзывов

Похожие инструкции для b2178

Бренд: IBM Страницы: 208

Бренд: Tandy Страницы: 301

Бренд: Prowise Страницы: 22

Barbie B-Glam LC68-12

Бренд: Oregon Scientific Страницы: 2

Notebook V12.3.10

Бренд: EUROCOM Страницы: 296

Бренд: Acer Страницы: 313

Бренд: IVIEW Страницы: 16

Бренд: Dell Страницы: 2

Бренд: Dell Страницы: 20

Бренд: ETen Страницы: 36

Бренд: Clevo Страницы: 122

Бренд: Clevo Страницы: 105

Бренд: Clevo Страницы: 102

Бренд: Clevo Страницы: 99

Бренд: AIRIS Страницы: 2

Бренд: Targus Страницы: 1

Бренд: AIRIS Страницы: 122

Бренд: Reloop Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды