Fujitsu b2178 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 89

Fujitsu b2178 Скачать руководство пользователя страница 46

36

Here is the explanation necessary as your basic knowledge before connecting peripherals.

Some setting up works are required for a certain peripherals.

You cannot use some PC peripherals just by connecting it to a PC. Those peripherals require
some setting up work after connection. For example, printers and PC cards require “driver
installation” work after connecting them. And memory and other peripherals do not require
such setting up works. Make sure to consult with this document for the peripheral connection
to complete the work correctly.

See also the documents for the peripherals

The peripheral installation methods shown in this document are only a few examples. Make
sure to consult with the documents for the peripherals as well as this document.

Use genuine products

See “System Diagram” for the genuine optional device from our company. We cannot guarantee
proper function on this PC for the peripherals from other sources. When it is necessary to
use the peripheral from the other source, consult with the manufacturer of the product.

Use the peripherals conform ACPI standard

This PC is set to ACPI mode for Windows 2000 and Windows 98. Power save and other
functions may not work correctly if a peripheral does not work in ACPI mode.
•

Notes for installation/removal. The installation of the peripheral must be done after the
setting up an operating system except for a PS/2 mouse. The set-up function might not
complete correctly if such a peripheral is attached before the operating system set up. For
the operating system set up, see “Software Guide”.

Peripherals

Critical Point

When you connect a peripheral to a connector, make sure that the direction of the connection
is correct and connect straight.
When you connect more than one peripherals, complete setting for each peripherals before
installing others.

Quilt Sec 2_34-47

17/10/2000, 15:37

36

«
...
44
45
46
47
48
...
»

Содержание b2178


























































































Отзывы:

Нет отзывов