Fujitsu b2178, Руководство пользователя

Страница: 56 / 89

46
4. Connector Box
SECTION 2
This section explains the installing procedure of the connector box.
This section explains the connector box.
IMPORTANT
When you install peripheral devices on, or remove them from the connector box,
always turn off the power to the PC and disconnect the AC adapter.
Always remove the peripheral devices when you carry your PC around, or the PC
body or the connector on the connector box may be damaged.
1 Install the connector box on the bottom side of your PC.
(1) Put your PC straight down on the Connector box so as to align both connectors. (2) Hold
the specified parts shown in the figure and attach the PC firmly onto the Connector box.
CAUTION
INJURY
When installing the connector box on the PC, be careful not to get your finger caught in
as you may be injured.
Installing the Connector Box
Connector Box Connector
IMPORTANT
The connector box can be installed/removed regardless of the PC status. If a FDD
unit is connected using the FDD unit connector on the connector box, however, be
sure to turn off the power to the PC before installing/removing the connector box.
If the connector box is installed or removed during the power to the PC is On,
operation of some of the peripheral devices which are connected with the connector
box may become unstable. In this case, turn off the power to the PC before you
install/remove the connector box.
2
2
Quilt Sec 2_34-47 17/10/2000, 15:37 46