Fujitsu AG * V12LAC Series, Инструкция по эксплуатации

Страница: 88 / 89

3. ATTACHMENT OF INSURATION SEAL
Fig. 4
Cut the insulation seal in length in the Fig.3 and seal the insulation seal to the indoor unit on the top and back side in Fig.4.
Fig. 3
4. INSTALLING THE INDOOR UNIT
Install the indoor unit in the wall hole and fasten the indoor unit at 4 locations each at top and middle of the unit.(Fig.5)
●
Do not use the wall hook bracket at half concealed.
Please refer to the installation manual of the main body for other how to install it.
124
423
703
438
124
[Installation of indoor unit]
• Fix the indoor unit with 4 screws surely.If improperly installed, might cause to injury due to the toppling or falling.
• Install the indoor unit at the place that has adequate strength.
Install the indoor unit so that the installed unit can withstand the weight of adult body weight.
If improperly installed, might cause accidental injury due to the toppling or falling.
WARNING
720 ~ 725 mm
570 ~ 575 mm
Attachment datum: Base edge line
INSULATION SEAL
Top view
(80)
Front side
Back side
0~5 mm
INSULATION SEAL
Attachment datum
Edge of R-end
0~5 mm
0~5 mm
P/N 9316532014