Fujitsu 80, Спецификации логического интерфейса SCSI

Страница: 263 / 310

5.1 Sense Data
C141-C010 5-7
Table 5.2 Additional sense code and additional sense code qualifier (2 of 6)
C* Q* Name Explanation
Sense
key
11 00 Unrecovered Read Error Unrecovered read error occurs during reading data field (LBA
Miscompare Error detected by SCSI portion) 3
01 Read retries exhausted Unrecovered error was detected during data read (retry out). 3, B
02 Error too long to correct Unrecovered error was detected during data read (BCRC error
detected by SCSI) 3, B
04 Unrecovered read error,
auto reallocation failed
Auto allocation failed during read. 3
13 00 Sync Byte not found for
Data field
SB (Sync Byte) could not be detected in the Data area. 1, 3, B
14 00 Record entity not found Expected data from a sector was undetected. (LBA compare error
detected by FMT) 1, 3, B
01 Record not found The target data block (sector) could not be detected. 1, 3, B
01 Mechanical positioning
Error
A seek error occurred in the drive. 1, 3, B 15
02 Positioning Error detected
by read of medium
LBA did not match due to Cylinder number’s mismatch. 1, 3, B
01 Recovered data with retries A data error was recovered from by reading was retried. 1
02 Recovered data with
positive head offset
A data error was recovered by read retry with offsetting head to
positive direction. 1
03 Recovered data with
negative head offset
A data error was recovered by read retry with offsetting head to
negative direction. 1
06 Recovered data without
ECC: data auto-
reallocated
Automatic alternate allocation was applied without ECC correcting a
data error. 1
17
08 Recovered data without
ECC: recommended
rewrite
Rewriting to the same sector was performed without ECC correcting
a data error. 1
18 00 Recovered Data with Error
Correction Applied
A data error was recovered by read retry with ECC corrercting. 1
02 Defect list error in primary
list
An error was detected during reading of the defect list (P List). 3
03 Defect list error in grown list An error was detected during reading of the defect list (G List). 3
80 Log information read error An error was detected during reading of statistical information. 3
81 Log information write
error
A write error was detected during writing of statistical information. 3
84 Mode Select SA write
Error
An error was detected during writing of SA information (Mode
Select Paramenter) 3
Ax Drive Parameter SA write
Error
An error was detected during writing of SA information (Device
Information) 3
19
Bx Drive Parameter SA write
Error
An error was detected during writing of SA information (Device
Information) 3
1A 00 Parameter list length error There is a mistake in the indication of the parameter list page length. 5
* C: Additional Sense Code, Q: Additional Sense Code Qualifier