Fujitsu 80, Спецификации логического интерфейса SCSI

Страница: 272 / 310

Sense Data Error Recovery Methods
5-16 C141-C010
Table 5.3 Sense data error classification (2 of 4)
K* C* Q* Outline of Error L*
Recovery Method
(See Table 5.4.)
3 11 xx Unrecovered read error Need 12
13 00 Sync byte not found for data field
14 01 No record found
These errors were detected during accessing of the
disk media, but they were errors which could not
be recovered from through the IDD's retry
processing.
Positioning error Need 12 3 15 xx
This is an error of the disk drive’s seek system
3 19 xx SA information error Need 7
1C xx SA information error not found
The information recorded in (SA) on the disk
media cannot be read correctly.
31 00 Medium form at corrupted Need 18
FORMAT command failed
The data format on the disk media is not correct.
3
31 01
The data format on the disk media is not correct.
Peripheral device write fault Need 7 4 03 xx
This is an error of the disk drive’s write system.
4 32 01 Defect list update failure Need 7
These are errors detected in the operation of the
disk drive.
4 32 00 No defect spare location available None 19
No usable alternate blocks exist on the disk drive.
4 40 nn Diagnostic failure on component 'nn' Need 13
An error was detected in the IDD's self-diagnosis.
4 44 nn Internal target failure Need 20
An internal hardware error or a microcode
detection error was detected in the IDD.
4 4C xx Calibration failed Need 10
C4 xx Drive failure
The initial seek was terminated abnormally. Or, a
serious error was detected in the drive's control
system.
* K: Sense Key C: Additional Sense Code
Q:
Additional Sense Code Qualifier
L: Logging Necessary? (shown in Section 5.2.3)