Fujioh FR-FS2270/90VP, Руководство по эксплуатации

Страница: 12 / 40

12
Installation
Washer-head
wood screw
( ∅ 5.1 × 25)
Temporary
fixing hole
Mounting surface
(cabinet)
Wall
5mm
➃
➃
➂
➂
➁
➁
➁
➁
Washer-head wood screw
( ∅ 5.1 × 45)
Power
cord
➀
4
Install cooker hood on mounting surface
(cabinet)
1) Slot the temporary fixing hole on the upper
side of the cooker hood into the screw fitted
as shown on the right and slide the temporary
fixing holes towards the rear end (
①
).
* Hold the cooker hood firmly to ensure that the
cooker hood does not fall during the process.
2) Fully tighten the 4 supplied washer-head wood
screws (
∅
5.1×25) in the temporary fixing holes
(
②
).
3) Screw in the 2 supplied washer-head wood
screws (
∅
5.1×25) provided into the 2 round
holes on the upper side of the cooker hood
at the position shown in the right figure (
③
).
4) Screw in the 2 supplied washer-head wood
screws (
∅
5.1×45) provided into the holes on
the rear side of the main unit at the position
shown in the right figure (
④
).
Note
Incase reinforcement is required, arrange it through the installation service provider.
3
Screw in washer-head wood screws on the mounting surface
Referring to “Confirmation of the installation location” on page 8, fasten the supplied washer-head
wood screws (
∅
5.1×25) into the mounting surface through the keyholes of the upper side of the
main unit. Allow about 5mm space between the wall and screwheads for hanging the cooker hood.