17
Maintenance
1F02 2881
Filter
Detaching
Slide the lock forward while holding the filter knob to remove it.
Pull out the filter moving it forward while supporting it with your
hand so that it does not fall, then detach it from the three hooks
at the bottom of the main unit.
Attaching
Insert the main unit hooks into the rear side of the filter,
then push the front side of the filter onto the main unit.
Slide the lock backwards to affix the filter in place.
Knob
Lock
Knob
Open by
about 5cm
Groove
Loosen
Knob
Lock
Note
Be sure to hold the filter with hand when removing it.
Otherwise, it may drop and result in injury.
Disassembly/Assembly of filter
FR-FS2290RP (Recycling type) : Double filter only
[Disassembly]
1) Remove the knob by turning it in the direction
of loosen.
* Ensure that the removed knob does not get
misplaced.
2) Open the upper side (where screw holes are
located) by about 5cm and detach the filter by
pulling it out from the groove at the bottom.
[Assembly]
1) Install the filters into the groove in such a way
that the knob holes of both filters align exactly
at the same place.
2) Attach the knob by turning it in the direction
of tighten and fix it firmly.
Align the
knob holes
Knob
Knob hole
Groove
Tighten
Содержание FR-FS2270/90VP
Страница 20: ......
Страница 28: ...28 安 装 确认安装位置 FR FS VP FR FS RP FR FS RP R R R R 吸油烟机 安装孔细节 吸油烟机 安装孔细节 φ 电源插头 长度 m 电源插头 长度 m φ φ 单位 mm ...
Страница 40: ......