9
Installation
1F02 2881
Preparation before installation
Rectifier panel
Slightly
push
Press the arresters
➀
Fixing
bracket
Open
➁
➂
Hanging
bracket
Hooking
bracket
1
Removing rectifier panel
1) Support the rectifier panel with both hands and slightly push it forward. Press the left and right arresters
of the rectifier panel for detaching (
①
).
2) Support the rectifier panel with both hands to slowly detach it (
②
).
3) Uphold the rear end of the rectifier panel at the position shown in the right figure to detach it from the
hanging bracket of the cooker hood (
③
).
Be sure to detach both points at the same time. Otherwise, the metal parts may deform.
Filter
Hook
Knob
Lock
2
Removing filter
Slide the lock upwards while holding the filter knob to remove it.
Lift out the filter moving it upwards while supporting it with your
hand so that it does not fall, then detach it from the three hooks
at the bottom of the main unit.
Oil panel
Screw
➀
➁
➂
3
Removing oil panel
1) Loosen the two screws securing the oil panel to the hood body (
①
).
2) Supports the oil panel with both hands to slowly detach it (
②
).
3) Uphold the rear end of the oil panel at the position shown in the right
figure below to detach it from the hood body (
③
).
Содержание FR-FS2270/90VP
Страница 20: ......
Страница 28: ...28 安 装 确认安装位置 FR FS VP FR FS RP FR FS RP R R R R 吸油烟机 安装孔细节 吸油烟机 安装孔细节 φ 电源插头 长度 m 电源插头 长度 m φ φ 单位 mm ...
Страница 40: ......