Fujioh FR-FS2270/90VP, Руководство по эксплуатации

Страница: 7 / 40

7
Installation
1F02 2881

Installation
1. Install the cooker hood carefully and avoid any contact with any metal parts (the metal lattice in the
wall or the like) of the building.
2. Never embed the body of the cooker hood in the wall. Otherwise, it may result in the electric leakage
of the unit.
3. The air shall not be discharged into hot flues that are used for discharging fumes generated from
burning gas or other fuels (Not applicable to cooker hoods that can discharge the air back into the
room).
4. The distance between the topmost part of cooking appliance and the lowest part of cooker hood,
when it is located exactly over the cooking appliance, shall be 650mm to 850mm. If greater distance
is specified in the cooking appliance manual, it must be taken into account.
5. Use a gas hob with a width less than that of the cooker hood.
6. Avoid using the cooker hood with changes in specifications, for instance, with modified switches.
7. Never install the cooker hood in a wet area or in other wet rooms since it may result in electric shock
or damage.
8. Never install the cooker hood at a place where the ambient temperature exceeds 40°C, otherwise it
may result in machine failure.
9. To protect your hands from injury, please wear working gloves when installing the cooker hood.
10. If the power cord is damaged, it shall be replaced by the manufacturer or its service agent or a
similarly qualified person to prevent any hazard.
Preparation and checking before installation
CAUTION
Checking mounting surface strength
The mounting surface should have sufficient strength to support the cooker hood. The cooker hood
shall be installed on a location that can support the weight of the cooker hood for an extended
period of time.
[Product weight 15kg (FR-FS2270VP), 17kg (FR-FS2290VP), 18kg (FR-FS2290RP).]
 In the case of boarded wall

If the thickness is more than 20mm, mount the cooker hood directly to the wall.

If the thickness is less than 20mm, embed a reinforcing board and mount the cooker hood to
this board.

In the case of a concrete/tile faced wall
 Embed a reinforcing board in the wall in advance, or use a curl plug or the like.
Checking accessory parts
Take out the main unit and accessory parts from the packing box, and check if all accessories
described in the packing list are available.
Power plug
The cooker hood uses a 3-pin power plug.
Be sure to use the wall outlet specified for the cooker hood.