FujiFilm GYN101CAG-G09, Руководство пользователя

Страница: 158 / 252

8
KEYPAD PANEL
8-12
8-5) Parameter setting mode
In the parameter setting mode, parameters can be edited.
Press the MODE key to display , and press the ENT key for 1 second or more to select the desired
parameter.
After selecting the target parameter, press the
∧
or
∨
key to select the parameter number to be edited first.
Press the ENT key to edit the parameter setting.
(1) Parameter
The parameter includes two types: those for which the change is reflected on the servo amplifier and
servomotor immediately, and those for which the change is reflected after the power is turned off and
on again.
(2) Indication and editing
The indication and editing methods for parameter are as follows.
- Value indication
The most significant digits that can be edited are indicated first.
Example: Parameter #1 (Setting range: 1 to 32767, Initial value: 8)
Because the number of digits that can be edited is five (32767), is indicated first.
To clarify the number of digits of the value, zero is not indicated at places that cannot be edited.
To move among the digits, press the MODE key while holding down the SHIFT key.
(1 sec or more)
ENT (1 sec or more)
MODE MODE MODE MODE
ESC ESC ESC ESC
SHIFT SHIFT SHIFT SHIFT
ENT ENT ENT ENT
ESC
ENT (1 sec or more)
ESC
ENT (1 sec or more)
ESC
Most significant
digits
Middle
digits
Least significant
digits
Initial indication
The lit decimal point indicates the current
editing position (among the most significant
digits, middle digits and least significant digits).