82
Notes on the Power Supply
h
AA-size alkaline, Ni-MH (nickel-metal hydride) can be
used with this camera.
Do not use AA-size manganese, lithium or nickel-cadmium
(Ni-Cd) batteries in your FinePix S602 ZOOM because the
heat generated by the batteries could damage the camera
or cause malfunctions.
h
The operating lives of alkaline batteries vary between
brands and the life of batteries you purchase may be
shorter than the alkaline batteries provided with the
camera.
Applicable Batteries
Incorrect use of the batteries could cause them to leak, become
hot, ignite or burst. Always observe the precautions given below.
h
Do not heat the batteries or throw them into a fire.
h
Do not carry or store the batteries with metal objects such
as necklaces or hairpins that could come into contact with
the metal positive
Ω
and negative
≈
poles of the battery.
h
Do not expose the batteries to fresh or sea water, and take
particular care to keep the terminals dry.
h
Do not attempt to deform, disassemble or modify the batteries.
h
Do not attempt to peel off or cut the battery casing.
h
Do not drop, strike or otherwise subject the batteries to
strong impacts.
h
Do not use the batteries that are leaking, deformed,
discolored or exhibit any other obvious abnormality.
h
Do not store the batteries in very warm or moist locations.
h
Keep the batteries out of reach of infant and young children.
h
When loading the batteries into the camera, ensure that the
battery polarity (
Ω
and
≈
) is as indicated on the camera.
h
Do not use new batteries together with used batteries. In
the case of rechargeable batteries, do not use charged
and discharged batteries together. Do not use batteries of
different types or brands together.
h
If you do not intend to use the camera for a long period of
time, remove the batteries from the camera (Note that if
the camera is left with the batteries removed, the time and
date settings are cleared).
h
The batteries may feel warm immediately after being used.
Before removing the batteries, switch the camera off and
wait until the batteries cool down.
h
When replacing the batteries, always fit 4 new batteries.
Here, ‘new batteries’ refers to either recently purchased
unused alkaline batteries, or Ni-MH (nickel metal hydride)
batteries that have recently been fully recharged together.
h
In cold locations (at temperatures of +10°C/+50°F or below),
battery performance deteriorates and the time for which they
can be used shortens markedly. This is particularly true of
alkaline batteries. In cold conditions, put the batteries in your
pocket or a similar place to warm them before loading them into
the camera. If you use a body warmer to warm the batteries,
ensure that they are not in direct contact with the warmer.
h
Soil (such as fingerprints) on the battery terminals can markedly
reduce the number of available shots. Carefully wipe the battery
terminals clean with a soft dry cloth before loading the batteries.
If any liquid at all leaks from the batteries, wipe the battery
compartment thoroughly and then load new batteries.
If any battery fluid comes into contact with your hands or
clothing, flush the area thoroughly with water. Note that
battery fluid can cause loss of eyesight if it gets into your
eyes. If this occurs, do not rub your eyes. Flush the fluid out
with clean water and contact your physician for treatment.
■
Disposing of Batteries
When disposing of batteries, do so in accordance with your
local waste disposal regulations.
■
Notes on Small Rechargeable Batteries (Ni-MH
batteries)
h
Always use the special battery charger to charge AA-size
Ni-MH batteries. Charge the batteries as described in the
instructions provided with the battery charger.
h
Do not use the battery charger to charge batteries other
than those specified for use with the charger.
h
Note that the batteries may feel warm immediately after
being charged.
h
Ni-MH batteries are not charged at shipment. Be sure to
charge the batteries before using them.
h
The camera mechanism is such that it draws a minute amount
of current even when the camera is switched off. Take
particular care not to leave Ni-MH batteries in the camera for a
long period of time as they can become excessively
discharged and may no longer be usable even when charged.
h
Ni-MH batteries self-discharge even when not used. Always
charge Ni-MH batteries before using them. If the time for
which a battery provides power shortens markedly when it
has been correctly charged, this indicates that the battery has
reached the end of its effective life and should be replaced.
h
Soiling (fingerprints, etc) on the terminals of Ni-MH
batteries can greatly reduce the number of available shots.
When this occurs, clean the terminals carefully with a soft
dry cloth. Then use up the remaining charge in the
batteries and recharge them.
h
Newly purchased batteries or batteries that have been left
unused for an extended period may not be fully charged.
(This is indicated by the immediate display of the battery
low warning or a low number of available shots.) This is a
normal characteristic of the batteries and does not indicate
a fault. Repeatedly charging and using the batteries 3 or 4
times will restore them to a normal condition.
h
If you repeatedly charge a Ni-MH batteries before it is fully
discharged, it will suffer from the “memory effect”
✽
,
causing the battery low warning to appear while there is
still ample charge remaining in the battery. To restore the
batteries to their normal condition, use up all the charge in
the batteries before recharging them.
✽
Memory effect: A phenomenon affecting the battery
characteristics such that the apparent
battery capacity decreases.
Notes on the Batteries
Notes on Using the AC Power Adapter
Always use the AC-5VH/AC-5VHS AC Power Adapter with
the camera.
The use of an AC Power adapter other than AC-5VH/AC-5VHS
could result in damage to your digital camera.
h
This AC power adapter is designed exclusively for indoor
use.
h
Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
h
Turn off the power switch of the FUJIFILM Digital camera
before disconnecting the connection cord from the
FUJIFILM Digital camera’s DC input terminal. To
disconnect, take hold of the plug and pull it out (do not
disconnect it by pulling on the cord).
h
Do not use this AC power adapter with any device except
the specified device.
h
During use, this AC power adapter will become hot to
touch, but this is normal.
h
Do not disassemble the AC power adapter. Doing so could
be dangerous.
h
Do not use this device in a place with high temperature
and high humidity.
h
Do not drop or subject this device to strong shocks.
h
This device may emit a humming noise, but this is normal.
h
If used near a radio, this device may cause static, so play
the radio in a distant place.
