FujiFilm FinePix S5000, Руководство по обслуживанию

Страница: 40 / 82

40
4. Adjustments
FinePix S5000 Service Manual
<Step 1>
Double-click on the [FFW.exe] file (Fig.E) in the
adjustment software folder to display the [FFW
Start-up Screen] (Fig.F).
<Step 2>
Click on [Setting] (Fig.G-1) on the [menu bar] on the
screen.
Select [Mode setting] (Fig.G-2) from the pull-down
menu.
<Step 3>
Select the [EVR&Comm.] menu on the [Mode
setting] dialog screen (Fig.H-1).
Set the [EVR] items as follows (Fig.H-2).
Item Details
etc(-V2) Check
LANC Page Check
<Fig.G>
1
2
<Fig.H>
<Fig.I>
<Fig.J>
<Step 4>
Select the [Etc] menu on the [Customize] dialog
screen (Fig.I-1).
Set the [Etc] items as follows (Fig.I-2).
Item Details
# of automatic
measure
0
Permit mode change Do't check
Use Japanese font
Do't check
Don't show OK NG Check or Don't check
(Note)
If [Disable OKNG display] on the PC screen (Fig.H) is set
to OFF, the PC screen displays [OK] if adjustment is OK,
and [NG] if adjustment is NG (either setting is OK).
<Step 5>
Select the [Hardware] menu on the [Customize]
dialog screen (Fig.J-1).
Input the data to each items as follows (Fig.J-2).
PI /port
PIO 0
10 12 14 16
PIO 1 11 13 15 17
Set the [Hardware] items as follows (Fig.J-3).
Item Details
Debug mode Select [Default]
<Step 6>
When setup on the [EVR], [Etc], and [Hardware]
menus is complete, click on [Apply] (Fig.J-4) on the
[Customize] dialog screen to complete setup.
No further setup is required once setup is applied.
2
1
1
1
2
2
4
3