![FujiFilm CX-400 Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/fujifilm/cx-400/cx-400_owners-manual_2343447044.webp)
85
Installation on a Mac OS
10
Macintosh
84
Installation on a Mac OS
10
CONNECTING THE PRINTER AS A CARD READER
Connect the printer as a card reader and check that the USB Mass Storage Driver was installed
correctly. The Mass Storage Driver is installed at “FinePixViewer” installation.
4
Load a photographed memory card into the printer.
1
Set the printer [USB MODE] switch to [CARD READER] and turn the power off.
2
Connect the printer to the Macintosh using a USB cable.
3
Turn the printer power on.
5
• Do not format the memory card on the Macintosh as this may take the card unusable for taking pictures.
Note
FinePixViewer is automatically started and the pictures on the memory card are
displayed. A new “Removable disk” icon also appears on the desktop.
• If FinePixViewer does not start up and the removable disk icon does not appear, the software was not installed
correctly. Disconnect the printer and restart the Macintosh and then reinstall the software. If this does not resolve
the problem, refer to the Troubleshooting section.
Note
• When disconnecting the printer, always turn the power off using the specified procedure.
• When connecting the printer and Macintosh, do not perform the following operations. The memory card or the data
on the memory card may be destroyed.
Do not disconnect the USB cable or touch the printer (power switch, operation buttons, etc.)
Note
1
Set the printer [USB MODE] switch to [PRINTER] and turn the power off.
2
Connect the printer to the Macintosh using a USB cable.
3
Turn the printer power on.
4
The Macintosh automatically recognizes the printer.
The printer can now be used.
3
When installation is completed, the message
shown at the right appears.
Click the [Restart] button.
The Macintosh restarts.
CONNECTING THE PRINTER
Connect the printer to the Macintosh and check if the USB printer driver is installed correctly.
1
Check that the printer is not operating.
2
Turn the printer power off.
3
Unplug the USB cable from the printer.
DISCONNECTING THE PRINTER
To disconnect the printer from the Macintosh, use the following procedure.
Click
• When installation failed, restart the Macintosh and uninstall
(P. 91) and then reinstall the printer driver.
Note
T I P
• The Exif Launcher installed
with the FinePixViewer
automatically launches
FinePixViewer when the
printer is connected to the
Macintosh.
• When using the printer as a card reader, do not touch the [EJECT] button while the [BUSY] lamp is blinking.
Note