FujiFilm CR-IR 392, Руководство по эксплуатации, Страница: 25 / 34

3-5
Basic Operation
3
FCR PRIMA T2 Operation Manual 897N102546
When the main power switch is OFF
1
Turn ON the Main Power Switch of the FCR
PRIMA T2.
Main Power
Switch
Press.
The power/erasing mode indicator lamp lights on the
operation panel and the FCR PRIMA T2 starts
initialization operation.
When the FCR PRIMA T2 is up and running, the
cassette ready lamp lights on the operation panel.
Cassette
Ready Lamp
See [2.2.3 Operation Panel Display at the
Time of Startup/Shutdown] for the operation
panel display at the time of FCR PRIMA T2
start.
When the main power switch is ON
1
Press the Stand-by Switch on the operation
panel to turn the power ON.
Stand-by
Switch
The FCR PRIMA T2 starts initialization operation.
When the FCR PRIMA T2 is up and running, the
cassette ready lamp lights on the operation panel.
Cassette
Ready Lamp
See [2.2.3 Operation Panel Display at the
Time of Startup/Shutdown] for the operation
panel display at the time of FCR PRIMA T2
start.
3.3 Starting Up/Shutting Down the FCR
PRIMA T2 Main Unit
This section explains how to start up/shut down the FCR PRIMA T2 main unit.
To operate the Console, use the procedure described in
[3.2.1 Starting Up the System] .
3.3.1 Starting up the FCR PRIMA T2 main unit
CAUTION
An error may occur if you turn on the Main Power Switch of FCR PRIMA T2 right after turning it
off. Once turning it off, wait at least 15 seconds before turning it on again.