manualshive.com logo in svg

FujiFilm Apeos C6580, Справочное руководство, Страница: 53 / 75

Поделиться
Скачать
FujiFilm Apeos C6580 Скачать руководство пользователя страница 53

53

6   Finisher D/Interface Module

1)

Change the angle of the Top Output Tray to the lower fixed 
position (A).

2)

Install the wires on the extension tray.

Note

As holding the extension tray with a hand, insert the fixing 
devices firmly, and check that the wires will not come off from the 
extension tray.

3)

Adjust the wire positions as aligning the wires with the 
“

” marks.

When not using the kit

Store the kit in the storage case at the rear side of Finisher.

Paper Curl

If A5  is curled upward, a paper jam may occur.
For Interface Module, set the upward curl correction of Interface Module.
For Interface Decurler  Inserter, set the highest curl correction of Interface Decurler 
Module and upward curl correction of Inserter.

If thick paper is curled downward, a paper jam may occur.
For Interface Module, set the downward curl correction of Interface Module.
For Interface Decurler  Inserter, set the lowest curl correction of Interface Decurler 
Module and downward curl correction of Inserter.

If paper of 157 g/m

2

 or more is curled upward, a paper jam may occur.

For Interface Module, set the upward curl correction of Interface Module.
For Interface Decurler  Inserter, set the highest curl correction of Interface Decurler 
Module and upward curl correction of Inserter.

Refer

“Curl correction” (p.66)

Содержание Apeos C6580












































































Отзывы:

Нет отзывов