manualshive.com logo in svg

FujiFilm Apeos C6580, Справочное руководство, Страница: 51 / 75

Поделиться
Скачать
FujiFilm Apeos C6580 Скачать руководство пользователя страница 51

51

6   Finisher D/Interface Module

6.2

Outputting Paper

Top Output Tray

Loading guide

Place it on the Top Output Tray when using an envelope.

Changing angle

Change the angle when output paper remains at the exit and paper full is detected immediately.
Especially in the following case, paper full is likely to be detected, change the angle to the B position.

Thin coated paper

Coated paper with the length of 364 mm or more

Long paper

Pull the Top Output Tray to the right, remove it from the lower 
fixed position (A), and insert the claws at the lead edge of the 
tray to the upper fixed position (B).

Note

Normally set the tray at the lower fixed position.
If the tray is at the upper fixed position of the exit, paper may 
fall from the Top Output Tray and a paper jam may occur when 
paper is output to the Finisher tray.

If paper is curled, the effectiveness of angle change cannot be 
obtained.

Extension kit for long paper

Long paper can be loaded without its lead edge sticking out.

A

B

Содержание Apeos C6580












































































Отзывы:

Нет отзывов