52
Reference Guide Optional Units
Important
When paper exceeding the tray capacity is loaded, the Extension Tray may get broken.
Extension Tray
1)
Push the Top Output Tray from the rear side as pinching
the cap and remove the 4 caps at the lead edge of the Top
Output Tray.
2)
Change the angle of the Top Output Tray to the upper
fixed position (B).
Note
Change the angle to the lower fixed position (A) for paper with
the width of 256 mm or less.
3)
Insert 2 extension trays until they stop.
Note
Pass them through over the guide at the rear side of the tray until
they stop.
Thin paper loading wire
When it is difficult to load thin paper, install the wire.
Note
The tray capacity is 10 sheets.
Paper of which width is 256 mm or less cannot be used.
The supported paper weights are from 82 to 209 g/m
2
.
Paper size
Tray capacity
Width: 210 to 330 mm
Length: 488 to 1,300 mm
Up to 660 mm: 150 sheets
Up to 729 mm: 100 sheets
Up to 1,300 mm: 10 sheets
Note
This value applies if our C
2
paper is used.
