63
Chapter 7 Finisher
Staple: Output Capacity (standard value)
Values in the table above indicating the maximum number of sheets that can be stapled have been evalu-
ated using the following paper types:
J (82 g/m
2
), C (200 g/m
2
, 250 g/m
2
, 350 g/m
2
)
Important
Even for a print job whose number of pages is within the limit, please note that staple faults may occur
depending on the type of paper (specifically, Gloss Coated Paper), on the environment where the printer is
installed (room temperature, humidity, and others), and/or on the print data, even if you use recom-
mended paper types.
Even for a print job whose number of pages is within the limit, please note that staple faults may occur if
the job is made of a mixture of paper type or paper weight.
In an environment at a low temperature and low humidity, stapling of 40 sheets or more may cause paper
jams.
Note
The printer determines paper type and paper weight based on paper information set for the job, not based
on paper actually loaded in the tray.
The printer determines the number of sheets per job based on job information, and thus, when multifeeds
occur, stapling will be performed even if the number of sheets being fed exceeds the limit. However, this
can cause staple faults.
Paper weight (g/m
2
)
Side Stitch
Saddle Stitch
A4 or smaller
Larger than A4
Uncoated
Coated
Uncoated
Coated
Uncoated
Coated
52 - 59
100
35*
65
35*
30*
25*
60 - 71
30
72 - 80
35
35
25
81 - 90
91 - 105
50
30
50
30
20
106 - 128
45
15
129 - 150
20
20
20
20
10
151 - 176
177 - 220
5
221 - 256
4
257 - 300
10
10
10
10
3
301 - 350
*
: Staplable. However, binding accuracy or paper feed performance cannot be guaranteed.
