Fuji Xerox DocuPrint CP405 d, Руководство пользователя

Страница: 70 / 306

70
Printer Connection and Software Installation
 Dynamic Methods of Setting the Printer’s IP Address
There are two protocols available for dynamically setting the printer’s IP address:
• DHCP (enabled by default)
• AutoIP
You can turn on/off both protocols using the operator panel or CentreWare Internet Services.
NOTE:
• You can print a report that includes the printer’s IP address. On the operator panel, press the ( Menu ) button, select
Report / List , press the button, select Printer Settings , and then press the button. The IP address is listed
on the Printer Settings page.
Using the Operator Panel
To turn on/off either the DHCP or AutoIP protocol:
1
On the operator panel, press the ( Menu ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Network Setup
, and then press the button.
4
Select
TCP/IP
, and then press the button.
5
Select
IPv4
, and then press the button.
6
Select
Get IP Address
, and then press the button.
7
Select
DHCP / Autonet
, and then press the button.
Using CentreWare Internet Services
To turn on/off either the DHCP or AutoIP protocol:
1
Launch your web browser.
2
Enter the IP address in the browser’s address field, and then press the Enter key.
3
Select Properties .
4
Select the Protocol Settings folder on the left navigation panel.
5
Select TCP/IP .
6
In the Get IP Address field, select the DHCP / Autonet option.
7
Click the Apply button.