Fuji Xerox DocuPrint CP215 Series, Руководство пользователя

Страница: 172 / 246

172 Troubleshooting
Clearing Jams
This section includes:
• "Avoiding Jams" on page 172
• "Identifying the Location of Paper Jams" on page 173
• "Clearing Paper Jams From the Front of the Printer" on page 174
• "Clearing Paper Jams From the Rear of the Printer" on page 175
• "Clearing Paper Jams From the Center Output Tray" on page 177
• "Jam Problems" on page 179
Careful selection of appropriate print media and proper loading allow you to avoid most jams.
See also:
• "About Print Media" on page 106
• "Supported Print Media" on page 108
NOTE:
• Before buying large quantities of any print media, it is recommended that you try a sample first.
 Avoiding Jams
• Use only recommended print media. See "About Print Media" on page 106 for more information.
• See "Loading Print Media in the Multipurpose Feeder" on page 112 and "Loading Print Media in
the Priority Sheet Inserter" on page 121 to load print media properly.
• Do not overload the print media sources. Make sure that the stacked print media does not
exceed the maximum height indicated on the paper width guides.
• Do not load wrinkled, creased, damp, or curled print media.
• Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try
feeding one sheet at a time through the multipurpose feeder or the priority sheet inserter.
• Do not use print media that you have cut or trimmed.
• Do not mix print media sizes, weights, or types in the same print media source.
• Make sure that the recommended print side is facing up when you insert the print media.
• Keep print media stored in an acceptable environment. See "Print Media Storage Guidelines" on
page 107 for more information.
• Do not remove the priority sheet inserter during a print job.
• Make sure that all cables connected to the printer are correctly inserted.
• Overtightening the guides may cause jams.