Fuji Xerox DocuCentre-VI C2264, Быстрая справка для англоязычных пользователей

Страница: 117 / 129

Image Quality Trouble
117
Tr
ou
bleshoo
tin
g
6
Part of the image
is missing on the
copy. Is folded or wrinkled paper
included in the tray? Remove the unsuitable paper or replace all of
the paper with a new one.
Refer to "Loading Paper" (P.82).
Is the document pasted or
folded? The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the document
to flatten the document against the
document glass.
The copy has a
stripe pattern. Is the enlargement ratio too
large? Vertical stripes may be printed on the copies
depending on the ratio. Adjust the ratio to
eliminate the stripes.
Color shift of
color copies is
poor, resulting in
unsatisfactory
image quality. Is the color calibration
incorrect? Execute auto calibration.
Refer to "Executing Calibration" (P.98).
Is the machine set where it is
exposed to direct sunlight? If the document glass is exposed to strong
light when you turn the machine on or cancel
the Power Saver mode, color shift may occur.
Close the document cover and turn the
machine on, and when the machine becomes
ready to copy or print, turn the machine off
and then on one more time.
Printing is faint.
(smudged,
unclear) The paper is damp. Replace the drum cartridge with a new one.
Refer to "Loading Paper" (P.82).
The drum cartridge has
deteriorated or is damaged. Replace the drum cartridge with a new one.
Contact our Customer Support Center.
There is no toner left in the
toner cartridge. Replace the toner cartridge with a new one.
Refer to "Replacing the Toner Cartridge" (P.89).
Black dots are
printed. The drum cartridge has
deteriorated or is damaged. Replace the drum cartridge with a new one.
Contact our Customer Support Center.
Symptom Cause Remedy