- 46 -
INZ-TN2ZSVS-E
4.3.1 Selecting output type
Instantaneous correction value or average correction value or CP calculation value can be selected in
this mode.
(1) Move the cursor to <1. CH No.> using the
key,
and press the
key.
The screen switches as shown at right.
Selection can be made from “Corrected concentration value,” “Corrected average concentration
value,” “CP calculation value” or “None.”
Setting contents
(2) Move the cursor to the channel (CH) to be set using
the
key.
Press the
key, and the cursor moves to the entry
field.
(3) Select setting contents using the
key, and press
the
key.
The CH selection screen appears again.
(4) Make the setting of other channels in the same manner.
Setting has now been completed.
“Depends on specifications.”
Initial value
• Setting can be made only when CO, and CO
2
(CO calculation value) analyzers are added for
measured components.
• Be sure to select “NONE” not to make the setting.
• See “1.4.2 Outline of display screen” for each operational expression.
Caution on setting
• Be sure to make the setting, following the proper
order.
• Do not select the same output type.
Caution on setting
ESC
ESC
ENT
,
ENT
,
ENT
,
Setting complete
