- 39 -
INZ-TN2ZSVS-E
4.2.2 Key lock
The key lock function can be used to prevent improper operation and entry by an unauthorized person.
(1) Move the cursor to <Key Lock> using the
key,
and press the
key.
The cursor moves to the value to be entered.
• ON
: Enables key lock.
• OFF : Resets key lock.
Setting contents
• OFF
Initial value
(2) Select “ON/OFF” using the
key.
(3) Press the
key to register the setting.
Then the item selection screen appears again.
The setting has now been completed.
• The following operations can be made even when key lock is set to “ON.”
(1) ON/OFF of the
key (switching between the measurement and the standby modes)
(2) Execution of zero/span calibration
(3) Execution or error cancel
(4) ON/OFF setting of this mode (key lock)
(5) Adjustment of brightness
• Set this mode to “OFF” before making settings other than the above.
Caution on setting
ESC
ENT
,
ENT
,
Setting complete
